Manufacturer: Bad Elf, LLC
Brand: Bad Elf
The Bad Elf GPS and GLONASS RECEIVER is the only approved external GPS accessory designed to directly connect to your Lightning Connector equipped iPad, iPod touch and iPhone. This Bad Elf GPS accessory plugs into the dock connector and allows Apps to read your current location.
AT&T Cisco 3G MicroCell GPS Antenna for Wireless Network GPS Signal Extender DPH151
AT&T and Cisco have worked together to develop a robust femtocell solution for the home and home office: the AT&T 3G MicroCell. The AT&T 3G MicroCell acts like a mini cellular tower right in the home. It connects to AT&T's network using existing broadband Internet service. With AT&T 3G MicroCell, customers receive improved cellular signal performance for both voice calls and cellular data applications. It can provide up to 5 bars of AT&T cell signal to your 3G and 4G mobile phones (including iPhone, Android, and Windows mobile).
Versatile all-in-one mount that can be used with antennas or satellite dishes. Can be mounted on the roof, wall, chimney or any other flat surface. J-pipe is reversible from mounting foot for a variety of positioning options. Gray weatherproof coating.
Manufacturer: Quality Global Products
Boost your signal with this waterproof GPS external antenna with built in low noise amplifier (LNA). This GPS antenna provides 28 dB of gain with its built in LNA. The industry standard SMA connector will work with most GPS systems and the magnetic base allows you to conveniently attach it to to the roof of your car. Technical Specs 1. Dielectric Antenna Center Frequency: 1575.42MHz Â±3MHz V.S.W.R: 2:01 Bandwidth: Â±5 MHz Impedance: 50 Peak Gain: > 3dBic based on 7x7cm ground plane Gain Coverage: > -4dBic at -90 < 0 < 90 (over 75 volume) Polarization: RHCP 2. LNA/Filter LNA Gain Without cable: 28dB Typical Noise Figure: 2.0dB Filter Out Band Attenuation: (f0=1575.42MHz) 7dB Min f0+/-20MHz; 20dB Min f0+/-50MHz; 30dB Min f0+/-100MHz V.S.W.R: < 2.0 DC Voltage: 3V to 5V DC current: 7-10MA 3. Overall Frequency Range: 1575/1609MHz V.S.W.R: 2.0 Gain: 30Â±3dBic Impedance: 50? 3. Mechanical Weight: 60 gram Size: 45x38x15mm Cable: RG174 Connector: SMA Mounting: Magnet base Housing: Black 4. Environmental Working Temp: -40~+105 Waterproof test: 4 hours under the tap, let the water rush over the housing; Vibration: Sine sweep 1g (0-p) 10 ~ 50 ~ 10Hz each axis Humidity: 95% ~ 100% R
Description This wireless Transceiver module is an easy and suitable module if you want to setup your wireless communication system with low cost!! It can achieve a good balance between wireless transition performance and cost! You can easily add it with your own MCU/ARM/PIC/AVR/STM32 system! What\'s more, this nRF24L01+ module is designed with Power amplifier and SMA antenna This allowed you to use the wireless communication up to 1000 meters! (No barrier) Specifications: Frequence: 2.4GHz~2.5GHz Operating voltage: 3 ~ 3.6V Max Current: 115mA Multi-frequency: 125 frequency Support up to six channels of data reception Datasheet and interface link: Click Here to Download Package Included: 1PCS*New NRF24L01+PA+LNA SMA Antenna Wireless Transceiver communication module 1PCS*SMA Antenna
The GA38 GPS GLONASS Antenna is built to take advantage of the GLONASS system/constellation of satellites as well as standard GPs. This robust external antenna is packaged in a low-profile waterproof housing and provides 3 easy mounting solutions: pole, surface or under-deck (for the underside of fiberglass decks). External GPS/GLONASS antennas provide increased flexibility and installation options as well as the potential for enhanced reception of GPS/GLONASS signal for those products with built-in GPS/GLONASS antennas. Package Content: GA38surface mounting bracketpole mounting bracketudner-deck mounting bracketmounting hardwareantenna cable (231ftl/10m)installation instructionswarranty Attach it to a standard 1 inch OD, 14 threads per inch, pipe threaded pole (not included) Uses a BNC connector to connect to the port labeled ANTENNA or EXT GPS on a compatible chartplotter Fits Garmin 400, 500 series chartplotters and many earlier models as well Antenna cable (32 ft./10 m) Height 6.00 Width 6.00 Depth 6.00 Weight 1.88 Color Operating System Batteries Included Batteries Required Number of Batteries Battery Type No battery required Language English Assembly Required
Replacement part for Pioneer Power w/Speaker Cord Assy.
Fits into back of specific Pioneer Head Units
Made by Xtenzi
Compatible models with ref to function and compatibility,
Pioneer Part No for Refrance: CDP1063 , CDP1307 ,CDP1095 , CDP1137
LENGTH: 6'' (in) LONG,
PLUG STYLE:.MOLEX ,16- Full Pin
System Volts: 12V,
All Wires are Color Coed and Marked for Easy Installation See EIA color reference.
Fits: Replacement Pioneer wiring harness for,
Caution: Just in case the specific model is not shown or cannot find replacement part please Email us or call us,
Or not sure if this one is fully compatible please consult us before you place order. Thank you