SpySpot Slim Extended Battery for GPS Tracker GL 200 GL 300 Enduro Pro
Manufacturer: Spy Spot
The SpySpot Extended Battery for the TT8850 Micro Tracker Miniature GPS GL 200 / GL 300 will extend the battery life of your GPS to up to a couple months and features a strong magnet on the bottom of the case. The extended battery weatherproof magnetic case includes a wall charger to recharge the battery. (GPS Tracker Not Included). Battery life will depend on motion, location, and interval.
Wsken Premium Magnetic Micro USB Quick Charging Cable with LED Status Display, High Speed USB 2.0 A Male to Micro B Sync and Charge Cable Line for Android, Samsung S6/Edge, HTC, Motorola, Nokia, Xiaomi and More (1M Silver)
1. Unique Combination of both metal and magnetisim. Connect with 1 second, both sides can be charging. 2. 2400mAh Electric current can be all owed 3. Maximum loading weight 50kg. Plug test 30000 times 4. Lightning white reminding on Charging. 5. Compatible with all android phones and tablet pcs. Matallic magnetic wire may be charged according to the device. Automaticaly adjusts the output current. Fully compatible with all types of digital products. Package Included: 1pcs USB Cable
Awinner Charging Clip for Garmin Vivoactive - Replacement USB Charger Adapter Charge Cord Charging Cable for Garmin Vivoactive GPS Smart watch
Garmin Vivoactive Charging ClipComplete 2 tasks with 1 cable using our charging/data cradle. Connect the cable to your computer's USB port to recharge your vÃvoactive and to transfer data to and from your computer. This cable also pairs with an optional AC adapter (sold separately)
ARKON GN079WD Replacement Upgrade or Additional Windshield Dashboard Sticky Suction Mounting Pedestal with 3-Inch Arm for Garmin nuvi GPS
Manufacturer: Arkon Resources Inc.
The GN079WD sticky suction mounting pedestal is compatible with Garmin nuvi 40, 50, 200, 2013, 24x5, and 25x5 Series devices, as well as Garmin nuvi 1450, 1450T, 1490T, 1200, 1250, 1260T, 1300, 1350, 1350T, 1370T, and 1390T models. This mount package includes only the Sticky Suction Mounting Pedestal with 3-inch articulating arm and 17mm ball head, and an optional 3M adhesive dashboard mounting disk. (The above listed Garmin nuvi devices should include a 17mm swivel ball-compatible holder; replacement holders sold separately.) Replace that tired old Garmin suction mount that always falls off with Arkon's new sticky suction mount. The Sticky Suction Mounting Pedestal is ideal for car dashboards, windshields, and other flat or slightly textured surfaces. The pedestal's base uses a powerful combination of polyurethane gel and suction to provide a maximum surface bond. The 3-inch articulating arm of the suction mount adjusts vertically and provides 360-degree rotation, providing flexibility in viewing the smartphone from any angle. To install, simply clean the mounting area with the included alcohol pad to ensure an optimum grip, then set the pedestal and push down on the one-touch lever to engage the suction. In order to prevent permanent indentation marks on dashboard surfaces made of soft vinyl, leather, or similar materials, Arkon recommends using the included 3M adhesive mounting disk. While powerfully strong, the sticky suction mount is also easily removable and reusable. If it has a drop in suction, just rinse the pad with a mild liquid soap and warm water, and then let air dry to restore the suction.
ChargerCity extra large hard case for 7 inch GPS is specifically designed to hold and protect oversized GPS units. A padded divider is included to protect your GPS screen from your other accessories. A mesh compartment allows you to carry your GPS charger, external antenna etc. A foam filler is also included if you have a slightly smaller GPS. Compatible w/ All Garmin Nuvi GPS Models 42 42LM 44 44LM 52 52LM 54 54LM 55 55LM 55LMT 56 56LM 56LMT 57 57LM 57LMT 58 58LM 58LMT 67 67LM 67LMT 68 68LM 68LMT 1100 1200 1300 1350 1370 1390 1450 1490 2455 2457 2457LMT 2595 2497 2497LMT 2539 2539LMT 2555 2557 2557LMT 2558 2558LMTHD 2559 2559LMT 2577 2577LT 2589 2589LMT 2595 2597 2597LMT 2598 2598LMTHD 2599 2599LMTHD 2639 2639LMT 2689 2689LMT 2699 2699LMT Nuvi 2757LM Nuvi 2797LMT
This is the ultimate GPS module for your Raspberry Pi, Arduino or other microcontroller project! The breakout is built around the MTK3339 chipset, a no-nonsense, high-quality GPS module that can track up to 22 satellites on 66 channels, has an excellent high-sensitivity receiver (-165 dB tracking!), and a built in antenna. It can do up to 10 location updates a second for high speed, high sensitivity logging or tracking. Power usage is incredibly low, only 20 mA during navigation. Includes an ultra-low dropout 3.3V regulator so you can power it with 3.3-5VDC in, 5V level safe inputs, ENABLE pin so you can turn off the module using any microcontroller pin or switch, a footprint for optional CR1220 coin cell to keep the RTC running and allow warm starts and a tiny bright red LED. The LED blinks at about 1Hz while it's searching for satellites and blinks once every 15 seconds when a fix is found to conserve power. If you want to have an LED on all the time, we also provide the FIX signal out on a pin so you can put an external LED on. Two features that really stand out about version 3 MTK3339-based module is the external antenna functionality and the the built in data-logging capability. The module has a standard ceramic patch antenna that gives it -165 dB sensitivity, but when you want to have a bigger antenna, you can easily add one. Comes with one fully assembled and tested module, a piece of header you can solder to it for breadboarding, and a CR1220 coin cell holder. Battery not included. Many tutorials available at Adafruit's website.