Kicker CX600.1 CX 600 Watt RMS Mono Block Class D Car Audio Amplifier
1200 Watts Peak/600 Watts RMS
Advanced features with trusted reliable performance
Signature compact footprint with vertical mounting option for space-challenged
installs (hardware included)
Features an optimized circuit layout for clearest sound quality
FITTM (Fail-Safe Integration Technology) to accept output from virtually any
FIT's lab-grade, balanced differential inputs offer best possible noise
Metal end panels shield any radio interference and noise
Built-in crossovers and adjustable KickEQTM for dialing it in
DC offset or 12v remote auto turn-on modes
Mono amps contain 24dB/octave, high-pass subsonic filter fixed at 25Hz
Hifonics Brutus BRX3016.1D 3000W Amp Class D Amplifier with Wiring Kit
The Hifonics BRX3016.1D car audio amplifier features a MAX power handling of 3000 watts and a RMS power handling of 200 watts at 2-ohms and 1000 watts at 4-ohms. Hifonics has perfected the latest in NGSD digital chip technology to provide you with an extremely efficient, low temperature, high amplification system that others only dream about. There are several options for installation and the mono Next Generation Super D-Class Brutus amplifiers can run at 1, 2 or 4-Ohm as well, for an even tighter bass response! These high-performance copper wires are wrapped in the durable and flexible SurfaceFlex wire jacket for effective cable routing. The CRB fuse holder has been specially plated with nickel for corrosion protection against the elements. Last but not least, distortion and external noise are reduced to a minimum with the Strand Interaction Conductor. \nWe are an authorized Hifonics Dealer!
JL Audio HD Series Monoblock Class D Amplifier
RMS Power Rating (11V-14.5V):
4 ohms: 1200 watts x 1 chan.
3 ohms: 1200 watts x 1 chan.
2 ohms: 1200 watts x 1 chan.
1.5 ohms: 1200 watts x 1 chan.
Max power output: 1200 watts x 1 chan.
MOSFET power supply
Remote bass level input (HD-RLC required and sold separately)
LED power indicators
Single channel operation
Preamp RCA outputs
Single Cycle ControlTM
Heavy duty aluminum alloy heatsink for heat dissipation
RCA level inputs
Variable high-pass filter (50-500 Hz, 24 dB/octave)
Variable low-pass filter (50-500 Hz, 24 dB/octave)
Frequency response: 6-30,000 Hz
Optional wired remote level control: JL Audio HD-RLC
Optional stacking equipment for HD amplifiers: JL Audio HD Stack Kit
Dimensions: 10-13/16"L x 8-1/4"W x 1-15/16"H
2-gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier.
Power Specifications - Subwoofer Channel
RMS Power @ 4 ohms 1200 watts x 1 channel
RMS Power @ 2 ohms 1200 watts x 1 channel
RMS Power @ 1 ohm 1200 watts x 1 channel at 1.5 ohms
Peak Power Output 1200 watts x 1 channel
Amplifier Class D
Number of Channels 1 - Mono
Total Peak Power Output 1200 watts
Total RMS Power Output 1200 watts
Maximum Input Gauge Size 2 AWG
Minimum Impedance Unbridged 1.5 ohms
Minimum Impedance Bridged N/A
THD at Rated RMS Power 1%
Speaker Level Inputs No
Preamp Outputs 1 pair
Built-in Crossover Low-pass (LP)
High-Pass Crossover Frequency 50 - 500 Hz
Low-Pass Crossover Frequency 50 - 500 Hz
Subsonic Filter 30 Hz
Signal-to-Noise Ratio 110 dB
Channel Separation N/A
Bass Boost N/A
Bass/Gain Remote Optional (Accessory required and sold separately)
JL Audio HD-RLC
Fan Cooled No
Fuse Rating N/A
CEA-2006 Compliant Yes
The sk-85.4Ab is a four channel amplifier designed alongside the SK series monoblock amplifiers to provide you with the power you expect your mid and highs to have in order to keep up with the extreme bass. An advanced heatsink design for maximum heat dissipation makes this amplifier very efficient. Capable of being ran in 2, 3, and 4 channel modes provides the versatility that many enthusiasts desire. Whether you are running just a front speaker stage on two channels and a subwoofer bridged on the other two, or all pro audio mid, this amplifier will provide the power your system thirsts for. The amplifier's extensive crossover network makes running active speaker setups a breeze. Class ab multichannel amplifier compact & versatile design - highly efficient RMS power @ 2 ohm : 125 watts x 4 channel (14.4V) RMS power @ 4 ohms : 85 watts x 4 channel (14.4V) RMS power @ 4 ohms mono : 250 watts x 2 channel (14.4V) frequency response : 20hz~30,000hz input sensitivity : 6v~0.2V line output : yes low pass filter @ 12db slope : 50hz~5khz high pass filter @ 12db slope : 50hz~5khz damping factor : 300< bass boost @ 45hz : 0~18db signal to noise ratio : 105db remote gain knob included line out RCA connection mode switch : ch2/ch4 fuse rate : 30 amp x 2 4 gauge power & ground terminals dimensions : 350mm (length) x 241mm (width) x 64.5Mm (height).
Boss R2000M 2000W Riot Monoblock Mosfet Mono Amplifier with 4 Ga Amp Kit
The BOSS R2000M 2000W Riot Monoblock Car Audio MOSFET Power Amplifier provides 2000 Watts of MAX power! This Class A/B Amplifier features a MOSFET power supply, a Soft Turn-On Circuit, Thermal Overload & Speaker's Short Protection, Power & Protection LEDs, and a Remote Subwoofer Level Control. The BOSS R2000M 2000W Riot Monoblock Car Audio MOSFET Power Amplifier can power any car audio application! This complete amplifier wiring kit comes with all the cables, connectors and accessories you'll need to wire your amp easily. This amplifier wiring kit comes with 4-gauge, high-current power cables with 315 multi-stranded copper, EMI isolated RCA audio cables with maximum surface contact connect with an exclusive VM Audio barrel grip, a nickel-plated high-impact resistant 60 AGU fuse holder with exclusive 4-gauge maximum wire-to-surface current flow directivity and much more. This amplifier wiring kit also comes with all the installation hardware you'll need to have your amp up and running in less time. ![alt text]\n : http://www.vminnovations.com/sys/resource.ashx?guid=6088617e844b4420a69def16beba86bb
Tarantula amplifiers continue to dominate the Sound stream amplifier arsenal. For the newest 2015 generation, Sound stream maintained their stable performance, but has given them a unique appearance. Each Tarantula Electro amplifier features a 12-point RGB LED lighting system, containing its own independent RGB control. A simple press of the end panel mounted switch changes the color to one of several presets, slow-motion color change, or rapid flashing random color. For more custom installs, a single color can be selected during slow-motion color change. 2015 Tarantula Electro models include 4-channel, 1-ohm stable class D 5-channel & monoblocks, and an additional .5-ohm stable 3,000w monoblock.